Simple Method To Creating a Floor For Home Theater.

Design and construction of a home theater involves more than just closing a part of your house on a site dedicated to movie watching. It also enhances the acoustics of the hall to deliver maximum enjoyment when watching movies at home. Although most homeowners focus on the walls and ceilings in the consideration of noise, a plan for home theater also plays an important role in providing the best sound. Appropriate building a home theater can help you enhance your movie watching experience.

Requirement:
Measuring tape; Circular saw; Table saw; Electric stapler; Carpet; thick gloves and shatter-resistant goggles

2-by-4-inch pressure-treated lumber; 4-inch wood screws; 1-inch-thick sound-absorbing foam; 1/2-inch-thick plywood

Start building:

1. Measure the depth of the home theater room with a measuring tape. This determines the length of the joists that support the flooring. Use a circular saw cut pressure-treated lumber sections to 2-by-4-inch length.
2. Set the size your home theater seats are cut 2 - by - 4 - inch timber on completion of their 2-inch during the 12-inch by 2-4 inches of standing at the top end of the timber 2. their finger at random on both sides of the seating area.
3. Cut 1-inch piece of foam sound absorption with a knife to fit between the floor beams, Staple foam used between the beams, the electric stapler.
4. Place the plywood to 1/2-inch-thick. On the part that is necessary to use a table saw. Attach the plywood to the crossbar with 4-inch wood screws 4 inches during the time of the drill and screwdriver bit.
5. Plywood covered with carpet for comfort and sound absorption properties of the layers, the better.

Note: Wear thick gloves and shatter-resistant goggles while assembling the home theater floor to prevent injuries.